Newb retrofit question

That should be the numbers above.I did get some more pictures though.see attached. I can hook the large plugs back up if need be but most goto what I’m assuming is the control board mounted to the front.  

drives 
   

Those look like standard analog drives,

The real trick is figuring out the 14 pin connector pinout

The D41-17443C seems more common and probably has
the same pinout

Have you tried contacting CMC?

I have not yet. I’ll give that a shot for a wiring diagram.

Interesting in the different board. They look almost identical. This machine was for sheet metal only so maybe that would be the difference.