Hello,
I'm new here and run linux cnc on mill and lathe with sherline driver box in their computer.
Wow now I use a mechanical edge finder, it works fine (under a thou) but consumes time which is critical for me.
So I ordered a xyz probe which I saw working on some cnc routers.
www.aliexpress.com/item/1005002454673762...1.0.0.510d4c4dHY0gBX
My driver box doesn't have any output for a probe.
When it came I found that it has 2 wires and I don't know how to connect it and run.
I also consider this one
www.aliexpress.com/item/1005003434486963...00025771673783%22%7D
but it seems it goes with just wires
Is it possible to put it in a usb input (i have plenty of them) or may be mic
I also have a parallel port breakout board
www.amazon.ca/gp/product/B07N2MYDKR/ref=...01_s00?ie=UTF8&psc=1
but still don't understand how to use it.
Thank you for your help
