Missing halui pins

Where is halui.joint.N.analog in 2.7?

I am trying to get the simple remote pendant example working, not having much success

net jog-x-analog <= mux2_x.out => mux2_x.in0 halui.joint.0.analog halui.axis.x.analog
net jog-y-analog <= mux2_y.out => mux2_y.in0 halui.joint.1.analog halui.axis.y.analog
net jog-z-analog <= mux2_z.out => mux2_z.in0 halui.joint.2.analog halui.axis.z.analog

Can you describe where you are looking for it? Some of the halui pins don't show up until after the gui is turned on I believe.

Can you find the pin in halmeter or halshow? What's your ini and Hal file like

2.7 has these 2 pins linuxcnc.org/docs/2.7/html/man/man1/halui.1.html
halui.jog.N.analog
halui.jog.deadband

2.8 has these 4 pins linuxcnc.org/docs/2.8/html/man/man1/halui.1.html
halui.joint.jog-deadband
halui.joint.N.analog
halui.jog.N.analog
halui.jog.deadband

Jogging using joints was introduced to v2.8

Excellent! my joypad is now working, still needs some adjustments but I can at least control x, y and z from it or the keyboard.

Thanks a stack

I was looking in the GUI under Machine/halui. But the reply below has sorted out the problem - and I can see the pins mentioned.

Hi could you kindly post what and how you actually changed?
I got the same/similar problem, but can't figure it out
greez
chris