I recently got a newer PC to run linuxcnc on, fresh install MX 19.4 and LinuxCNC 2.9. Exactly same as on the older pc, but now my pendant doesnt register...
I have already added the .rules file to udev
Code:
ATTR{idProduct}=="eb93", ATTR{idVendor}=="10ce", MODE="0666", OWNER="root", GROUP="plugdev"
But this is all I get:
Code:
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 413c:2113 Dell Computer Corp.
Bus 001 Device 003: ID 145f:028d Trust
Bus 001 Device 002: ID 8087:0a2a Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
einarak@linuxcnc:~ $
Code:
init not waiting for device XHC-WHB04B-6 vendorId=0x10ce productId=0xeb93, will continue in 0s ..
The machine is a Lenovo M710q tiny.
What could I be missing?
