Linuxcnc IDE

@Reinhart ...

Now I'm getting these output:
>...
>...
VM: new model created for > "dtgW" <

language: QLocale::German
country: QLocale::Germany
syslocale: "de_DE"     current locale: "de_DE"
translation-messages: "Ch" FAILED to load
translation-messages: "cmake_inst" FAILED to load
translation-messages: "CMake" FAILED to load
translation-messages: "CMake" FAILED to load
translation-messages: "CMakeLists" FAILED to load
translation-messages: "Condition" FAILED to load
translation-messages: "EXT" FAILED to load
translation-messages: "Falco" FAILED to load
translation-messages: "Falco" FAILED to load
translation-messages: "FalconView_" FAILED to load
translation-messages: "Makefile" FAILED to load
translation-messages: "qtcsetti" FAILED to load
translation-messages: "" FAILED to load
GK::fileName4( "ini" ) =>  "/home/udos/linuxcnc/configs/sim.axis.gantry/gantry_mm.ini"
ToolTable::processFile( "/home/udos/linuxcnc/configs/sim.axis.gantry/sim.tbl" )
tool-image-dir:  QFileInfo(/home/udos/linuxcnc/configs/sim.axis.gantry/)
    found  3  active axis. Mask set to: 7
could not create database: Unbekannter Fehler -2
Press <RETURN> to close this window...

 

@tommylight

maybe imgui is for you. Mit licence, only need to write own event system.

BigGray wrote:

@tommylight

maybe imgui is for you. Mit licence, only need to write own event system.

Looks promising, will have a longer look if i get a chance, thank you.