Newbie with a PC with LinuxCNC 2.8.2 with 6GB RAM and a Mesa 7i76e board connected to a Chinese 6040. It worked great for several months, but now after say 20-30 minutes, LinuxCNC crashes with the error:
Code:
Exception in Tkinter callback
Traceback (most recent call last):
File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__
return self.func(*args)
File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit
func(*args)
File "/usr/bin/axis", line 560, in actual_tkRedraw
self.tkRedraw_perspective()
File "/usr/bin/axis", line 520, in tkRedraw_perspective
self.redraw_perspective()
File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner
return f(self, *args, **kw)
File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 599, in redraw_perspective
glFlush() # Tidy up
error: (1285, 'out of memory')
Code:
When I run "top" in a terminal window, there is about 4GB free when it crashes. Error report, ini and hal files attached. Like I said, I'm new at this so feel free to point out if I've made poor choices in the configurations.
Thank you for any assistance you can provide. I can't wait to get this running reliably and start configuring the rotary axis.
Ted
