Problem when I setup the backlash option

More
4 years 1 month ago #251165 by Nest
Problem when I setup the backlash option was created by Nest
My electronic is a MESA 7i96
My machine is a routerCNC 3 axis

hi, good day i have a problem with the backlash option, when i setup this option, when the machine is work suddenly in short moving the axis bounces, this happen in the all axis with the option activated, sometimes on the x-axis and sometimes on the y-axis

Someone can help me?

Thanks you so much

Please Log in to join the conversation.

More
4 years 1 month ago #251166 by tommylight
Replied by tommylight on topic Problem when I setup the backlash option
www.forum.linuxcnc.org/26-turning/44704-...otor-tuning-question

Please Log in to join the conversation.

More
4 years 1 month ago #251348 by Nest
Replied by Nest on topic Problem when I setup the backlash option
Hi, i fix the problem... i had to correct the value of STEPGEN_MAXACCEL and now it works fine

INI Configuration

[img

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum