Tool height setter mesa 7i96 wiring

4 years 1 month ago #251425 by Tore80

Tool height setter mesa 7i96 wiring was created by Tore80

Hello, i need help to connect the tool height probe to the mesa7i96.Thanks

Please Log in to join the conversation.

4 years 1 month ago #251543 by Aciera

Replied by Aciera on topic Tool height setter mesa 7i96 wiring

Do you have schematics or can you tell us more about how the wires are supposed to be connected?

Please Log in to join the conversation.

4 years 1 month ago #251873 by zz912

Replied by zz912 on topic Tool height setter mesa 7i96 wiring

Look at this:

Please Log in to join the conversation.

4 years 3 weeks ago #253658 by Tore80

Replied by Tore80 on topic Tool height setter mesa 7i96 wiring

I find this schematic, but i need help to wire on mesa 7i96 without burn

Please Log in to join the conversation.

4 years 3 weeks ago #253674 by zz912

Replied by zz912 on topic Tool height setter mesa 7i96 wiring

For example:
source of Voltage (+) => Yellow and Red

Green => IN0 7i96
Black => IN1 7i96

IN COMMON 7i96 => source of Voltage (-)

Please Log in to join the conversation.

4 years 3 weeks ago #253687 by Tore80

Replied by Tore80 on topic Tool height setter mesa 7i96 wiring

Many thanks,
Connected yellow and green, now i need to configure in linuxcnc

Please Log in to join the conversation.

4 years 3 weeks ago #253691 by zz912

Replied by zz912 on topic Tool height setter mesa 7i96 wiring

Your next step is checking function in halshow.

Please Log in to join the conversation.

Time to create page: 0.171 seconds