7i76e I/O disapeared

More
4 years 1 month ago #251762 by furynick
7i76e I/O disapeared was created by furynick
I'm in strange trouble, LinuxCNC not starting anymore with following error :

Ooznest.hal:28: Pin 'hm2_7i76e.0.7i76.0.0.output-00' does not exist
I only replaced my spindle since last time it worked.

Please Log in to join the conversation.

More
4 years 1 month ago #251763 by furynick
Replied by furynick on topic 7i76e I/O disapeared
The complete report can be dl here :
cloud.furyweb.fr/index.php/s/JsKT6x6T56TpCWM

Please Log in to join the conversation.

More
4 years 1 month ago #251764 by PCW
Replied by PCW on topic 7i76e I/O disapeared
This likely means a problem with power to the field I/O section of the 7I76E
(orange connector)

Please Log in to join the conversation.

More
4 years 1 month ago #251787 by furynick
Replied by furynick on topic 7i76e I/O disapeared
I'm so stupid. I disconnected power to test spindle without powering anything else.

Problem solved, many thanks.

Please Log in to join the conversation.

Time to create page: 4.963 seconds
Powered by Kunena Forum