How to set lathe Machine x zero middle of drill on turret

More
4 years 2 weeks ago #254184 by Turners
How to set lathe Machine x zero middle of drill on turret was created by Turners
Hi 
how do I set a machine x zero to be middle of drill in tool 2  so it x0 is center a chuck and tool 2 .
thanks 

Please Log in to join the conversation.

More
4 years 2 weeks ago #254200 by cmorley
Replied by cmorley on topic How to set lathe Machine x zero middle of drill on turret
what screen and version of linuxcnc are you using?
Do you use the tool table?

Please Log in to join the conversation.

More
4 years 2 weeks ago #254210 by Turners
Replied by Turners on topic How to set lathe Machine x zero middle of drill on turret
Hi
2.8.4
And the standard gui
Yes have a tool table..
I don't need g55 or all the others as its only a lathe. Is there any way to remove them and just see one.?
Currently I have no limit switches

Please Log in to join the conversation.

Time to create page: 0.231 seconds
Powered by Kunena Forum