I am using Debian 11 with Linuxcnc installed from this link (
github.com/joco-nz/lcnc-bullseye-installer
)
I have Mesa 7i76e and succesfully wired a probe for measuring tool length. Unfortunately I could not install a probe screen like this one (
github.com/linuxcnc-probe-screen/probe-screen-ng
) or run a MDI command to automatically probe. A simple solution would be great!
Which version of LinuxCNC do you have from that install method?
LinuxCNC 2.9 has moved to Python3 and GTK+3 and I suspect that that probe screen has not.
Alternatively the issue might be the glade version, try "sudo a-t-get install glade-gtks"
