Probe Basic included with install

3 years 10 months ago #259224 by COlger81

Probe Basic included with install was created by COlger81

Out of curiosity, why isn't Probe Basic GUI included with LinuxCNC installation?

Chris

Please Log in to join the conversation.

3 years 10 months ago #259228 by cmorley

Replied by cmorley on topic Probe Basic included with install

Because it's a completely separate project, that overlaps development already in linuxcnc.

Please Log in to join the conversation.

3 years 10 months ago #259230 by COlger81

Replied by COlger81 on topic Probe Basic included with install

Is it a reliable GUI? I'm pretty happy with Gmoccapy but the conversational code seems very handy.

Please Log in to join the conversation.

3 years 10 months ago #259231 by cmorley

Replied by cmorley on topic Probe Basic included with install

Lots of people use it as I understand. The fellows working on it are dedicated and skilled.
But I have not used it.

Please Log in to join the conversation.

Time to create page: 0.081 seconds