B Axis Limits 2.9

Is there a way to increase B axis MIN_LIMIT and MAX LIMIT?

Something like this:    [JOINT_3]MIN_LIMIT > [AXIS_B]MIN_LIMIT (-9999.0 > -9999999.0)
                                    [JOINT_3]MAX_LIMIT < [AXIS_B]MAX_LIMIT (9999.0 < 9999999.0)

Profiling with B axis.

If you omit the limit settings for joint/axis it should use a value of 1e99 / -1e99.
Which is basically unlimited.
linuxcnc.org/docs/html/config/ini-config...t__lt_num_gt_section