axis 'out of memory' crash

Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.4 Machine configuration directory is '/home/linuxcnc/linuxcnc/configs/DSG' Machine configuration file is 'dsg.ini' INIFILE=/home/linuxcnc/linuxcnc/configs/DSG/dsg.ini VERSION=1.1 PARAMETER_FILE=dsg.var TASK=milltask HALUI= DISPLAY=axis COORDINATES=X   Z KINEMATICS=trivkins coordinates=xz Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Found file(REL): ./dsg.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i24 at 0000:07:00.0 hm2/hm2_5i24.0: Low Level init 0.15 hm2/hm2_5i24.0: Smart Serial Firmware Version 43 Board hm2_5i24.0.7i71.0.1 Hardware Mode 0 = standard Board hm2_5i24.0.7i71.0.1 Software Mode 0 = output_only Board hm2_5i24.0.7i71.0.1 Software Mode 1 = output_fieldvoltage Board hm2_5i24.0.7i70.0.2 Hardware Mode 0 = standard Board hm2_5i24.0.7i70.0.2 Software Mode 0 = input_only Board hm2_5i24.0.7i70.0.2 Software Mode 1 = input_analog Board hm2_5i24.0.7i70.0.2 Software Mode 2 = input_fieldvoltage Board hm2_5i24.0.7i87.0.4 Hardware Mode 0 = standard Board hm2_5i24.0.7i87.0.4 Software Mode 0 = analoginput_digitaloutput Board hm2_5i24.0.7i87.0.4 Software Mode 1 = analoginput16bit*4,8bit*4_digitaloutput Board hm2_5i24.0.7i87.0.4 Software Mode 2 = analoginput16bit*6_digitaloutput Board hm2_5i24.0.7i84.0.6 Hardware Mode 0 = standard Board hm2_5i24.0.7i84.0.6 Software Mode 0 = input_output Board hm2_5i24.0.7i84.0.6 Software Mode 1 = io_analog_fieldvoltage Board hm2_5i24.0.7i84.0.6 Software Mode 2 = io_encoder_analog hm2/hm2_5i24.0: 72 I/O Pins used: hm2/hm2_5i24.0:     IO Pin 000 (P4-01): PWMGen #0, pin Not-Enable (Output) hm2/hm2_5i24.0:     IO Pin 001 (P4-03): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_5i24.0:     IO Pin 002 (P4-05): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_5i24.0:     IO Pin 003 (P4-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_5i24.0:     IO Pin 004 (P4-09): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_5i24.0:     IO Pin 005 (P4-11): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_5i24.0:     IO Pin 006 (P4-13): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_5i24.0:     IO Pin 007 (P4-15): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_5i24.0:     IO Pin 008 (P4-17): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_5i24.0:     IO Pin 009 (P4-19): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_5i24.0:     IO Pin 010 (P4-21): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_5i24.0:     IO Pin 011 (P4-23): PWMGen #0, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 012 (P4-25): PWMGen #0, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 013 (P4-27): PWMGen #1, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 014 (P4-29): PWMGen #1, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 015 (P4-31): PWMGen #2, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 016 (P4-33): PWMGen #2, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 017 (P4-35): PWMGen #3, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 018 (P4-37): PWMGen #3, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 019 (P4-39): PWMGen #4, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 020 (P4-41): PWMGen #4, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 021 (P4-43): PWMGen #5, pin Out0 (PWM or Up) (Output) hm2/hm2_5i24.0:     IO Pin 022 (P4-45): PWMGen #5, pin Out1 (Dir or Down) (Output) hm2/hm2_5i24.0:     IO Pin 023 (P4-47): PWMGen #0, pin Not-Enable (Output) hm2/hm2_5i24.0:     IO Pin 024 (P3-01): IOPort hm2/hm2_5i24.0:     IO Pin 025 (P3-03): IOPort hm2/hm2_5i24.0:     IO Pin 026 (P3-05): IOPort hm2/hm2_5i24.0:     IO Pin 027 (P3-07): IOPort hm2/hm2_5i24.0:     IO Pin 028 (P3-09): IOPort hm2/hm2_5i24.0:     IO Pin 029 (P3-11): IOPort hm2/hm2_5i24.0:     IO Pin 030 (P3-13): IOPort hm2/hm2_5i24.0:     IO Pin 031 (P3-15): IOPort hm2/hm2_5i24.0:     IO Pin 032 (P3-17): IOPort hm2/hm2_5i24.0:     IO Pin 033 (P3-19): IOPort hm2/hm2_5i24.0:     IO Pin 034 (P3-21): IOPort hm2/hm2_5i24.0:     IO Pin 035 (P3-23): IOPort hm2/hm2_5i24.0:     IO Pin 036 (P3-25): IOPort hm2/hm2_5i24.0:     IO Pin 037 (P3-27): IOPort hm2/hm2_5i24.0:     IO Pin 038 (P3-29): IOPort hm2/hm2_5i24.0:     IO Pin 039 (P3-31): IOPort hm2/hm2_5i24.0:     IO Pin 040 (P3-33): IOPort hm2/hm2_5i24.0:     IO Pin 041 (P3-35): IOPort hm2/hm2_5i24.0:     IO Pin 042 (P3-37): IOPort hm2/hm2_5i24.0:     IO Pin 043 (P3-39): IOPort hm2/hm2_5i24.0:     IO Pin 044INFO CLASSICLADDER-   No ladder GUI requested-Realtime runs till HAL closes. Starting TASK program: milltask Starting DISPLAY program: axis Shutting down and cleaning up LinuxCNC... task: 437398 cycles, min=-0.460006, max=0.097582, avg=0.010040, 0 latency excursions (> 10x expected cycle time of 0.010000s)  (P3-41): IOPort hm2/hm2_5i24.0:     IO Pin 045 (P3-43): IOPort hm2/hm2_5i24.0:     IO Pin 046 (P3-45): IOPort hm2/hm2_5i24.0:     IO Pin 047 (P3-47): IOPort hm2/hm2_5i24.0:     IO Pin 048 (P2-01): IOPort hm2/hm2_5i24.0:     IO Pin 049 (P2-03): Smart Serial Interface #0, pin rx1 (Input) hm2/hm2_5i24.0:     IO Pin 050 (P2-05): Smart Serial Interface #0, pin rx2 (Input) hm2/hm2_5i24.0:     IO Pin 051 (P2-07): IOPort hm2/hm2_5i24.0:     IO Pin 052 (P2-09): IOPort hm2/hm2_5i24.0:     IO Pin 053 (P2-11): IOPort hm2/hm2_5i24.0:     IO Pin 054 (P2-13): Smart Serial Interface #0, pin tx1 (Output) hm2/hm2_5i24.0:     IO Pin 055 (P2-15): Smart Serial Interface #0, pin txen1 (Output) hm2/hm2_5i24.0:     IO Pin 056 (P2-17): Smart Serial Interface #0, pin tx2 (Output) hm2/hm2_5i24.0:     IO Pin 057 (P2-19): Smart Serial Interface #0, pin txen2 (Output) hm2/hm2_5i24.0:     IO Pin 058 (P2-21): IOPort hm2/hm2_5i24.0:     IO Pin 059 (P2-23): IOPort hm2/hm2_5i24.0:     IO Pin 060 (P2-25): Smart Serial Interface #0, pin rx4 (Input) hm2/hm2_5i24.0:     IO Pin 061 (P2-27): IOPort hm2/hm2_5i24.0:     IO Pin 062 (P2-29): Smart Serial Interface #0, pin rx6 (Input) hm2/hm2_5i24.0:     IO Pin 063 (P2-31): IOPort hm2/hm2_5i24.0:     IO Pin 064 (P2-33): Smart Serial Interface #0, pin tx4 (Output) hm2/hm2_5i24.0:     IO Pin 065 (P2-35): Smart Serial Interface #0, pin txen4 (Output) hm2/hm2_5i24.0:     IO Pin 066 (P2-37): IOPort hm2/hm2_5i24.0:     IO Pin 067 (P2-39): IOPort hm2/hm2_5i24.0:     IO Pin 068 (P2-41): Smart Serial Interface #0, pin tx6 (Output) hm2/hm2_5i24.0:     IO Pin 069 (P2-43): Smart Serial Interface #0, pin txen6 (Output) hm2/hm2_5i24.0:     IO Pin 070 (P2-45): IOPort hm2/hm2_5i24.0:     IO Pin 071 (P2-47): IOPort hm2/hm2_5i24.0: registered hm2_5i24.0: initialized AnyIO board at 0000:07:00.0 creating ladder-state hm2_5i24.0: dropping AnyIO board at 0000:07:00.0 hm2/hm2_5i24.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV     max: 100.000 units/sec 6000.000 units/min note: LJOG     max: 100.000 units/sec 6000.000 units/min note: LJOG default: 16.660 units/sec 999.600 units/min note: jog_order='ZX' note: jog_invert=set(['X']) Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last):   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__     return self.func(*args)   File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit     func(*args)   File "/usr/bin/axis", line 564, in actual_tkRedraw     self.tkRedraw_ortho()   File "/usr/bin/axis", line 526, in tkRedraw_ortho     self.redraw_ortho()   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner     return f(self, *args, **kw)   File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 629, in redraw_ortho     glFlush()                               # Tidy up error: (1285, 'out of memory') /usr/bin/linuxcnc: line 896:   984 Segmentation fault      $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS 891 978 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f2f4e202000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file:    /tmp/linuxcnc_info.txt can be posted to a forum or a web site like:      http://pastebin.com in order to provide information about the linuxcnc system and configuration.                 Date: Mon 16 Jan 17:06:05 GMT 2023             UTC Date: Mon 16 Jan 17:06:05 UTC 2023         this program: /usr/bin/linuxcnc_info               uptime: 17:06:05 up 1:14, 1 user, load average: 0.89, 1.70, 1.84      lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster       which linuxcnc: /usr/bin/linuxcnc                  pwd: /home/linuxcnc/linuxcnc/configs/DSG                 USER: linuxcnc              LOGNAME: linuxcnc                 HOME: /home/linuxcnc               EDITOR:               VISUAL:             LANGUAGE: en_GB:en                 TERM: dumb            COLORTERM:              DISPLAY: :0.0              DESKTOP: lightdm-xsession         display size: 1280x1024 pixels (338x270 millimeters)                 PATH: /usr/bin:/home/linuxcnc/linuxcnc/configs/DSG/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items:          nodename -n: DSG       kernel-name -s: Linux       kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.269-1 (2022-12-20)           machine -m: x86_64         processor -p: unknown          platform -i: unknown       oper system -o: GNU/Linux /proc items:              cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-23-rt-amd64 root=UUID=5e4bbcfe-3c21-4907-940e-9653b1c9b503 ro initrd=/install/gtk/initrd.gz quiet isolcpus=1,3           model name: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz                cores: 2              cpu MHz: 800.003              parport:               serial: 0000-0000 : serial Versions:                  gcc: gcc (Debian 8.3.0-6) 8.3.0               python: Python 2.7.16                  git: not_in_PATH           git commit: NA                  tcl: 8.6                   tk: 8.6                glade: not_in_PATH           glade-gtk2: not_in_PATH linuxcnc_var all:      LINUXCNCVERSION: 2.8.4 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples             REALTIME: /etc/init.d/realtime                  RTS: uspace           HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name                Version      Architecture Description +++-===================-============-============-===================================================================== un  linuxcnc            <none>       <none>       (no description available) un  linuxcnc-dev        <none>       <none>       (no description available) un  linuxcnc-doc        <none>       <none>       (no description available) ii  linuxcnc-doc-cn     1:2.8.4      all          motion controller for CNC machines and robots (Chinese ii  linuxcnc-doc-en     1:2.8.4      all          motion controller for CNC machines and robots (English documentation) ii  linuxcnc-doc-es     1:2.8.4      all          controlador de movimiento para máquinas CNC y robots (Español). ii  linuxcnc-doc-fr     1:2.8.4      all          motion controller for CNC machines and robots (French documentation) un  linuxcnc-sim        <none>       <none>       (no description available) un  linuxcnc-sim-dev    <none>       <none>       (no description available) ii  linuxcnc-uspace     1:2.8.4      amd64        motion controller for CNC machines and robots ii  linuxcnc-uspace-dev 1:2.8.4      amd64        PC based motion controller for real-time Linux

hm2_5i24.0: initialized AnyIO board at 0000:07:00.0 creating ladder-state hm2_5i24.0: dropping AnyIO board at 0000:07:00.0 hm2/hm2_5i24.0: unregistered