Remap - what is modalgroup?

More
3 years 6 months ago #268901 by zz912
Remap - what is modalgroup? was created by zz912
Hello,

I am learning remap. I would like ask, what is modalgroup ?
linuxcnc.org/docs/2.9/html/remap/remap.h...:sec:remap-statement

Where is explanation what is it?

Please Log in to join the conversation.

More
3 years 6 months ago #268914 by Aciera
Replied by Aciera on topic Remap - what is modalgroup?
Maybe this helps:
linuxcnc.org/docs/html/gcode/overview.html#_modal_groups

Please Log in to join the conversation.

More
3 years 6 months ago #268918 by zz912
Replied by zz912 on topic Remap - what is modalgroup?
It is a pity that there is no current table. Or I didn't find it.

M-codes

Currently supported modal groups are: 5,6,7,8,9,10.

In the table is missing group 5,6

Please Log in to join the conversation.

More
3 years 6 months ago #268925 by Aciera
Replied by Aciera on topic Remap - what is modalgroup?

In the table is missing group 5,6
 
 

Which table are you referring to? (groups 5 and 6 are in the table I linked)

[edit]
Oh, you mean MCodes currently support modal groups 5,6,7,8,9,10?
The table lists 4,7,8,9,10.
How did you come up with your list? From looking at the source code?

Please Log in to join the conversation.

More
3 years 6 months ago #268927 by zz912
Replied by zz912 on topic Remap - what is modalgroup?

How did you come up with your list? From looking at the source code?


From here:
linuxcnc.org/docs/2.9/html/remap/remap.h...:sec:remap-statement

 

Please Log in to join the conversation.

More
3 years 6 months ago #268962 by zz912
Replied by zz912 on topic Remap - what is modalgroup?
I wonder what the modalgroup does the most?

REMAP=M6 modalgroup=?? python=test_finish

Please Log in to join the conversation.

Time to create page: 0.084 seconds
Powered by Kunena Forum