Open or close vismach with pyvcp button

Oh great glad you got it.

Ya if it's no problem I'll add it in the report when I have more time. Thanks

when I jog faster, an error like this occurs 

########

Traceback (most recent call last):File "/usr/lib/python3/dist-packages/qtvcp/qt_makegui.py", line 110, in keyPressEventself.keyPressTrap(e)File "/usr/lib/python3/dist-packages/qtvcp/lib/xembed.py", line 81, in catch_keypressself.forward(e, e.nativeScanCode())TypeError: 'int' object is not callable

########

Ok I'll look into that.

Ok I got it fixed and pushed it to the repos.
Here is the commit if you need to do it manually:
github.com/LinuxCNC/linuxcnc/commit/c8c2...f6fb0d6f21994dc78cfd

Ends up after fixing the initial error, a worse problem showed: key press would work but key release didn't - very dangerous.

I got that fixed too.
Please let me know how it works for you.

Chris

I've tried it, and it works fine.
Thank you for your time..

But unfortunately there is no clearplot feature in qt-vismach which was previously available in basic vismach.

And a little more question how to display myhud (x y z coordinates) as in the existing example

Double clicking one of the mouse buttons should clear the screen. I'm sure I could add a pin to do the same.

I commented out the Hud could under VisWindow
Then you would need to add l8nes to define the Hud above it.

I'll find a link to a sample..

github.com/LinuxCNC/linuxcnc/blob/2.9/li...ach/mill_xyz.py#L201

Shows the hud definitions

Ok, thank you. i can clear the plot using right mouse button.