Seeing values of gcode settings

3 years 5 months ago #271530 by Aciera

Replied by Aciera on topic Seeing values of gcode settings

looks like we can also pass more than one command in a single line:

Code:

;py,emccanon.MESSAGE(str(s.settings[2])),emccanon.MESSAGE(str(s.settings[3]))

Please Log in to join the conversation.

3 years 5 months ago #271531 by phillc54

Replied by phillc54 on topic Seeing values of gcode settings

MESSAGE is nice...

It even takes f strings:

Code:

;py,emccanon.MESSAGE(f"G64 P{str(s.settings[3])}  Q{str(s.settings[4])}")

Please Log in to join the conversation.

3 years 5 months ago #271533 by Aciera

Replied by Aciera on topic Seeing values of gcode settings

Cool, so after initializing with:

Code:

;py,import linuxcnc 
;py,import emccanon 
;py,s=linuxcnc.stat()

we can display the current values with:

Code:

;py,s.poll(),emccanon.MESSAGE(f"G64 P{str(s.settings[3])}  Q{str(s.settings[4])}")

Please Log in to join the conversation.

Time to create page: 1.568 seconds