What's the system parameters for current absolute (machine) coords?

More
3 years 5 months ago #272456 by nick.smith
What's the system parameters for current absolute (machine) coords? was created by nick.smith
What's the parameter the current position in Z, according to the machine (G53)? I need to set it to a variable.

I know I can do it by switching to say G59 if G59 matches G53, but is there another way?

Specific to PathPilot, if it matters. 

Please Log in to join the conversation.

More
3 years 5 months ago #272458 by MaHa
Replied by MaHa on topic What's the system parameters for current absolute (machine) coords?
My way to get machine coordinates
Code:
G28.1 - stores the current absolute position into parameters 5161-5166

Please Log in to join the conversation.

More
3 years 5 months ago #272466 by nick.smith
Replied by nick.smith on topic What's the system parameters for current absolute (machine) coords?
Perfect, thanks.

Please Log in to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum