freezing GUI during start

endian
Topic Author
Offline
Platinum Member

3 years 3 months ago #275674 by endian

freezing GUI during start was created by endian

Hello

can anybody help me with small configuraiton problem please?

I really do not know what I am doing wrong, when I am adding any startup code to .ini file (just for exa.. RS274NGC_STARTUP_CODE = G7) and lcnc GUI freeze and this blank GUI happend pic.1. and cmd.txt what is behind it in the terminal.

When I comment #RS274NGC_STARTUP_CODE = G7 everything works fine pic. 2 and cmdOk.txt what is behing it in terminal when everything is OK....

I found bug here

Code:

emc/task/emctask.cc 416: interp_error: Unknown word where unary operation could be
Unknown word where unary operation could be
emc/task/emctaskmain.cc 3091: can't initialize interpreter

but what could I do? I found this issue

thanks for assistance

regards Slav

Please Log in to join the conversation.

andypugh
Offline
Administrator

3 years 3 months ago #275737 by andypugh

Replied by andypugh on topic freezing GUI during start

It sounds like there is a problem with the RS274NGC_STARTUP_CODE line. Possibly the wrong type of line-end character (so that the first letter of the next line is seen as part of the G-code string)

Please Log in to join the conversation.

endian
Topic Author
Offline
Platinum Member

3 years 3 months ago #275740 by endian

Replied by endian on topic freezing GUI during start

yes thanks for your idea.

I found that DOS endline and missing spacer between G64 and P0.01. I had just G64P0.01.

Regards Slav

Please Log in to join the conversation.

Time to create page: 0.173 seconds