Hi everyone,I’m have not configured a sserial device before. I’ve read the relevant sections of hostmot2 manual and I’ve seen several warnings from PCW through the years of posts to not flash cards with incorrect bit files. Could someone give me a go / no-go on using the 7i92t_7i77_7i74.bin bit file that comes with the 7i92T support software download for a standard setup using 7i92t+7i77+7i70 The 7i70 is the ethernet input expansion board, the 7i74 is also an Ethernet expansion board. Should be okay…? The 7i70 is “self Configuring” I just need to set the mode in the loadrt config modparam string. I also need to remember to switch the jumpers on all boards to setup before flashing. Also, the 7i70 needs to be supplied field power from a power supply. There’s probably more but the bit file confirmation would set my mind at ease.thanks
-Doug
