Newbie question - linuxcnc & python3

3 years 1 week ago #283415 by phillc54

Replied by phillc54 on topic Newbie question - linuxcnc & python3

Another option is:

Code:

DISPLAY = ./python_file.py

Assuming the python file is executable and in the config directory.

Please Log in to join the conversation.

3 years 1 week ago #283416 by MakerYang

Replied by MakerYang on topic Newbie question - linuxcnc & python3

This method is also quite good, and it's more scalable.

Please Log in to join the conversation.

Time to create page: 0.028 seconds