- Posts: 22008
- Thank you received: 3
Connections probles
- tommylight
-
- Away
- Administrator
-
Less
More
3 years 6 days ago #283706
by tommylight
Replied by tommylight on topic Connections probles
sudo apt update
then try to install.
then try to install.
Please Log in to join the conversation.
3 years 6 days ago #283712
by Aciera
Replied by Aciera on topic Connections probles
Can you reach the internet with that computer at all?
If your computer cannot connect to the internet then you are not going to get anywhere trying to download and install software packages.
If your computer cannot connect to the internet then you are not going to get anywhere trying to download and install software packages.
Please Log in to join the conversation.
- alfredmaina
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 17
- Thank you received: 0
3 years 6 days ago #283769
by alfredmaina
Replied by alfredmaina on topic Connections probles
yes i am connected to the internet.. but still unable to edit connections to change my IPv4 from to 10.10.10.10
That is the main challenge that i have
That is the main challenge that i have
Please Log in to join the conversation.
- alfredmaina
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 17
- Thank you received: 0
3 years 6 days ago #283770
by alfredmaina
Replied by alfredmaina on topic Connections probles
Hi tommy. I tried to edit the connections using the "edit connections " option but still did not display more options to do so.
I want to try the second method which is to edit the file/etc/network/interface but i cannot get the location to add the below lines:
auto eth1
iface eth1 inet static
address 192.168.1.1
hardware-irq-coalesce-rx-usecs 0
Where do i get that location to add that line
I want to try the second method which is to edit the file/etc/network/interface but i cannot get the location to add the below lines:
auto eth1
iface eth1 inet static
address 192.168.1.1
hardware-irq-coalesce-rx-usecs 0
Where do i get that location to add that line
Please Log in to join the conversation.
Time to create page: 0.038 seconds
