need postprocessor for Tormach 1100 series 3

Available: Tormach 1100 series 3; Vectric's VCarve Pro running on Windows 10 machine.
Need: the linuxcnc postprocessor in simple text format for the Tormach machine so that I can edit it to be run from VCarve Pro.
I'm confused but I do have considerable programming experience.
Just the linuxcnc postprocessor in simple text format would do me fine.
Please help, if possible; otherwise, tell me.
Thanks, Sherril

Is there a generic LinuxCNC post?
For a mill LinuxCNC is almost entirely conventional, so a wide variety of posts are likely to work.

There is a post in Aspire for linux called LinuxCNC_G64_Arcs_mm.pp