black screen after installation of new debian12 Linuxcnc image

Hello,
i downloaded the new debain 12 2.91 image and installed it. Everything went fine no Errors. But after the reboot i got the start menu then some linux output and everything ended up in a black screen. I can connect via ssh to the machine and work here, but i have no display on it self.
I have a standard msi mini atx socket 1155 board with intel graphics and an i5 prozessor, Before i had the debian 10 linuxcnc image running fine on the same hardware

Georg

Boot the pc, hold down the shift key, when GRUB menu appears press E, add "nomodeset" after "quiet splash", press F10

there is no "quiet splash" in the script

i found out now the following - why is there a Xeon graphics driver installed, i have a standard Intel H61 Éxpress chipset

lspci -k | grep -EA3 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
Kernel driver in use: i915
Kernel modules: i915