joint 0 on limit switch error

More
2 years 9 months ago #290283 by BatUnt
joint 0 on limit switch error was created by BatUnt
hello, I used linux cnc from a mesa 7i96 board, everything worked fine until now joint 0 on limit switch error homing is done fine and when I want to run the program it throws me this problem. thank you

Please Log in to join the conversation.

More
2 years 9 months ago #290284 by BatUnt
Replied by BatUnt on topic joint 0 on limit switch error

Attachment not found

Please Log in to join the conversation.

More
2 years 9 months ago #290285 by PCW
Replied by PCW on topic joint 0 on limit switch error
Have you verified that your limit switch is working with halshow?

Please Log in to join the conversation.

More
2 years 9 months ago #290286 by BatUnt
Replied by BatUnt on topic joint 0 on limit switch error
both work, the wiring is fine, but when I want to start the spindle manually, it throws this error

Please Log in to join the conversation.

More
2 years 9 months ago #290287 by tommylight
Replied by tommylight on topic joint 0 on limit switch error

both work, the wiring is fine, but when I want to start the spindle manually, it throws this error
That is interference caused, does the machine have proper grounding and did you change the power socket?

Please Log in to join the conversation.

More
2 years 9 months ago #290289 by BatUnt
Replied by BatUnt on topic joint 0 on limit switch error
I moved the machine to another workshop, maybe I have a bad socket, I'll try

Please Log in to join the conversation.

More
2 years 9 months ago #290295 by BatUnt
Replied by BatUnt on topic joint 0 on limit switch error
thank you, problem solved, the problem was in the power supply

Please Log in to join the conversation.

Time to create page: 0.098 seconds
Powered by Kunena Forum