[buildbot2.highlab] 2.9-uspace locked?

2.9.2-x releases appears locked since Feb 2nd. Do we need to move to /master-uspace/ a.k.a 2.10.0~pre0.x to get fixes and updates?

Ref: buildbot2.highlab.com/debian/dists/bookworm/

2.9.2 is the last update of the current stable release 2.9. Bugfixes will be released as 2.9.3, if there are any.
2.10 is the current version number for the development branch of linuxcnc.

Fixes used to be pushed over to 2.9.2-x however stopped at 2.9.2-112-g54bca16afd on February 2nd for some reason.

Are you saying that in order to receive the most recent bugfixes we need to change:

Perhaps the buildbot2 is just on holiday?

Are you saying that in order to receive the most recent bugfixes we need to change:

Ah, now I get what you mean. No, don't do that.
It is indeed possible that the buildbot is down.

Seems that there simply haven't been any commits in the last two weeks on the 2.9 branch:
github.com/LinuxCNC/linuxcnc/tree/2.9

So confusing.....

A well deserved holiday if indeed it's down. Not complaining. Just wanted to follow-up fixes as they are spotted and patched.

Aciera wrote:

Seems that there simply haven't been any commits in the last two weeks on the 2.9 branch:
github.com/LinuxCNC/linuxcnc/tree/2.9

A bugless release. Good. Excellent. Looking good!!

The buildbot you refer to does not feed into the official release.
2.9.2 is a tag,  github.com/LinuxCNC/linuxcnc/tree/v2.9.2  

You should be able to git checkout v2.9.2

I'm not running the official release, but the regularly patched and more updated v2.9.2-xx one rather.

Buildbot2 is a great resource and convenience. Just got worried it was down... should have checked the commits first. Luckily member Aciera had more sleep than I had, and pointed out the obvious. All good.