G92 disable persistence

More
2 years 8 months ago #294378 by Aciera
Replied by Aciera on topic G92 disable persistence
yes

Please Log in to join the conversation.

More
2 years 8 months ago #294379 by Mecanix
Replied by Mecanix on topic G92 disable persistence
ohmygod lol

Respect! didn't know, sorry ab that... so much to find out about.

Please Log in to join the conversation.

More
2 years 8 months ago #294383 by Aciera
Replied by Aciera on topic G92 disable persistence

Respect! didn't know, sorry ab that...

Nothing to be sorry about, I don't know very much, really. Anybody with a github account can create an issue or a pull request.

Please Log in to join the conversation.

More
2 years 8 months ago #294384 by tommylight
Replied by tommylight on topic G92 disable persistence
Cover blown ... :)

Please Log in to join the conversation.

More
2 years 8 months ago #294386 by Mecanix
Replied by Mecanix on topic G92 disable persistence
Doxed... yikes! Know your best contributors & devs, everybody!

Found two bugs since I use Lcnc. Reported them and the devs had the fix before I even find where the calls were coming from. Let alone them having Lcnc patched before I wake up the following day. Pretty embarrassing to be a anybody-with-a-github-account sometimes.

Anyway. Good to know, Sigma. Grateful for everything, always was always will. Thumbs up guys

Please Log in to join the conversation.

More
2 years 7 months ago #295152 by Aciera
Replied by Aciera on topic G92 disable persistence
I filed a pull request with a fix for M2/M30 not resetting G52/G92:
github.com/LinuxCNC/linuxcnc/pull/2921

Please Log in to join the conversation.

Time to create page: 0.099 seconds
Powered by Kunena Forum