New to probing

More
2 years 8 months ago #294282 by JohnAlex3
New to probing was created by JohnAlex3
Hi all, can anyone tell me how to write a program or modify probegrid.ngc, to probe a line moving positive on Z and probing positive on X and record the result of that line/cord?

Please Log in to join the conversation.

More
2 years 7 months ago #294894 by andypugh
Replied by andypugh on topic New to probing
I would do it with a G-code O-word loop and the (PROBEOPEN, ) etc "magic comments"

linuxcnc.org/docs/stable/html/gcode/o-code.html#ocode:looping
linuxcnc.org/docs/stable/html/gcode/over...#gcode:probe-logging

How comfortable are you with hand-coding G-code?

Please Log in to join the conversation.

More
2 years 7 months ago #295037 by wuxiaoke
Replied by wuxiaoke on topic New to probing
I guess you need the G-Code g38 ?
Code:
G38.2 Z-100 F100 // res is on #5061~#5069

Please Log in to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum