Facing Error after updating Linuxcnc to 2.9 from 2.7

I tried to update Linuxcnc 2.7 wheezy preempt-rt to LinuxCNC 2.9 bookworm preempt-rt and copy old config files to new and try to start but facing error.

Due to limitated file upload here i am attaching mine HAL and INI files.

Everywhere you see axis.0. will need updating e.g. to axis.x.

Your INI file also need updating. For each axis you need:
[AXIS_X] and [JOINT_0]
[AXIS_Y] and [JOINT_1]
[AXIS_Z] and [JOINT_2]

All in all, you've prolly just discovered that you need a whole new set of config that rhyme with 2.9.

The reported error is a syntax error in line 21 of custom,hal:

setp axis.0.jog-vel-mode 0

Which looks OK (at least in the supplied file)

 Edit: as Mechanix suggested, this needs to have the axis letter
rather than number.

This should have been done by the conversion
script that automatically converts 2.7 configurations to 2.8+


It would be _much_  easier to identify the error by running LinuxCNC
from the command line and posting the printed text here.

Thank you so much guys will try to change axis number to letter and also try conversion script 

A side question from an unexperienced user.
How do I get Linuxcnc to show such an error message when failing at startup? Is it a HAL or INI command?

My current workflow is to change only a single thing in HAL, and then restart linuxcnc. 
If I change or add multiple lines I never know what the cause problem is when linuxcnc won't start afterwards.

 

Easiest way is to launch LinuxCNC from the command line:

linuxcnc
 

@mechanix and @pcw thank you so much guys machine is working now