automatic tool change

More
2 years 7 months ago #296619 by Abdulkareem
automatic tool change was created by Abdulkareem
hello everyone I was wondering if it was possible to do an automatic tool change without having an ATC I instead have a stationary tool holder .

Please Log in to join the conversation.

More
2 years 7 months ago #296671 by tommylight
Replied by tommylight on topic automatic tool change
Do you mean a "rack toolchanger"?

Please Log in to join the conversation.

More
2 years 7 months ago #296698 by Abdulkareem
Replied by Abdulkareem on topic automatic tool change
yes I have a rack tool changer

Please Log in to join the conversation.

More
2 years 7 months ago #296700 by Lpkkk
Replied by Lpkkk on topic automatic tool change
Yes, that kind of setup would require storing each holder position and then during tool change your gantry would need to go to this position to pickup right tool.

Please Log in to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum