Vfd 2.2kw spindle and tool z probe issue

Lpkkk
Topic Author
Offline
Senior Member

2 years 6 months ago #297390 by Lpkkk

Vfd 2.2kw spindle and tool z probe issue was created by Lpkkk

Hi
I've got 2.2kw spindle and hy vfd. Vfd is connected via modbus. Whenever I connect my probe to the milling cutter, my probe parport port input goes to true. I can still measure my tool with vfd switched off

Please Log in to join the conversation.

zmrdko
Offline
Elite Member

2 years 6 months ago #298198 by zmrdko

Replied by zmrdko on topic Vfd 2.2kw spindle and tool z probe issue

My first guest would be EMI. Do you use shielded cables?

Please Log in to join the conversation.

Time to create page: 0.078 seconds