new day new problems

Well the sun is shining and thing are much better.
Not sure if this had anything to do with my problems. I went out to the shop and ran a new Pncconf and that seem to clear up things. I cut 2 small G-codes with nice results. I turned off auto volts and used VAD of 64%, the Z DRO seemed to show high but the cut was nice with some dross on the under side.
Thanks for sticking with me (: (:

Glad you got it going. Auto Volts is good to use if you have a reasonably good quality plasma machine as it keeps to the specified height better as the electrode wears.