7i92 not pinging

Please find the attached photos.

advance frequency setting attached.

under "advanced frequency setting", advanced cpu core setting attached.

I would disable everything you can on the frequency page and try the ping test again

Well, I reinstalled LCNC 2.9.2. Motors are running, inputs are working.
system is 7i92+7i76(not D)+7i84(not D).
Inputs for 7i76 and 7i84 both working, but none of the outputs are showing voltage measured by multimeter. I activated outputs from HALSHOW.
FUELD VOLTAGE 24V
VIN 12V
how to activate out puts?

Did you measure the output relative to field voltage common (TB1 pin 1)?

Probably not relevant but If you have a 24V field voltage, why would you use a separate VIN?

 

Yes, output with respect to field voltage common.

But, I am sorry, outputs are actually working. The issue was that I was measuring voltage on top of screws and those screws were loose causing loss of contact to the pins at bottom.

Yeah, you cannot depend on probing the screws on the terminal blocks unless they are tight...