G71 canned roughing D value - Is this a bug?

More
2 years 3 months ago #305570 by cadcam
G71 canned roughing D value - Is this a bug? was created by cadcam
Linux 2.9.3 and any D greater than 0 will cause a "G7X error: Cannot intersect parallel lines". With a D0 value it will function perfectly.
Any Gurus who have an idea what the problem is would be appreciated. Code attached.
Thanks 

Attachment not found

Please Log in to join the conversation.

More
2 years 3 months ago #305597 by mark-v-d
Replied by mark-v-d on topic G71 canned roughing D value - Is this a bug?
Yes it's a bug. It should be fixed in 2.9.4.

For now you can "fix" this by removing the "N45 X32". line

Or make the X equal to the starting position so "N45 X33"

Please Log in to join the conversation.

More
2 years 3 months ago #305608 by cadcam
Replied by cadcam on topic G71 canned roughing D value - Is this a bug?
Champion! Thanks.

Please Log in to join the conversation.

Time to create page: 1.788 seconds
Powered by Kunena Forum