Queuing MDI Commands - LC2.9.2

More
2 years 3 months ago #306297 by electrosteam
Queuing MDI Commands - LC2.9.2 was created by electrosteam
My LC2.9.2 is running nicely on a Raspberry Pi 4B with AXIS.
But, it will not accept multiple MDI commands.
I used to be able to do this on the earlier LC2.8.4.

Spent some time checking ini and HAL configurations, and Forum searching, but no joy.

Suggestions ?

John

Please Log in to join the conversation.

More
2 years 3 months ago #306304 by cmorley
Replied by cmorley on topic Queuing MDI Commands - LC2.9.2
Seems to be an AXIS thing. works in qtdragon (I tested in master though)

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum