connecting a soft button to bob pin 17

I have imaginary 3-axis machine configured using stepconf wizard


I programmed the soft button

 <button>
     <halpin>"bob-Pin-17"</halpin>
     <text>"turn Pin-17 on"</text> 
     <font>;('Fixed',</font>
 </button>  

I want this button to set the output to the break out board pin 17 to true

I suppose this is the net statement goes to custom_postgui.hal file

 net pin-17-on  <= pyvcp.bob-Pin-17
net pin-17-on  is the signal name

then if the above is correct, where do I connect the signal defined above to the  physical pin 17

shall I write for example something like 
net pin-17-on =>  parport.0.pin-17-out 

if true, I think it goes to custom.hal

Many thanks

Good day

Philip

I think I got it

It is working now but it does not stay on (pin 17)

when I click on the soft button, and then release the mouse button , pin 17 goes back to the original state

so How can I make it permenent state change?

Thanks

Maybe try a 'toggle' component:
linuxcnc.org/docs/devel/html/man/man9/toggle.9.html

I will read and try it

Thanks

Aciera wrote:

Maybe try a 'toggle' component:
linuxcnc.org/docs/devel/html/man/man9/toggle.9.html

Now the toggle is working

I realy appreciate your help

Good day

Philip