Сreating a component

    Hi all! I need to write a component that could control the spindle gearbox shifting depending on the revolutions, but since I am a beginner, I first want to create a simpler component. The job of this simple component is to set the output to TRUE if both inputs are TRUE. To check, I use HALSHAW, I change the signals at the input of the component, but the output does not change, what am I doing wrong?

I found the reason, it was necessary to add my function to the thread.

I need to get around to doing this sort of thing myself. I usually use Classic ladder when I do things like that but
Classic Ladder feels like overkill when doing 1 or 2 simple things.

Use what you are used to. I have nver used CL and just write a comoponent.
Here is one to select from rapid/slow jogging  when an extra button is pressed. Hal just got too convoluted
github.com/rodw-au/showstopper/blob/master/jogpendant.comp