Anyone running Arduino IDE on a LinuxCNC machine

More
2 years 1 month ago #310478 by slowpoke
Anyone running Arduino IDE on a LinuxCNC machine was created by slowpoke
I'm using the following version of LinuxCNC:
Anyone running Arduino IDE on your machine, anything to be aware of before I download and install?
 

Attachment not found

Please Log in to join the conversation.

More
2 years 1 month ago #310479 by tommylight
Replied by tommylight on topic Anyone running Arduino IDE on a LinuxCNC machine
Get the appimage version, no installation required.
After download right click on it, go to permissions tab, check the "executable", close, double click on the file to run.
downloads.arduino.cc/arduino-ide/arduino...Linux_64bit.AppImage

Please Log in to join the conversation.

More
2 years 1 month ago #310507 by slowpoke
Replied by slowpoke on topic Anyone running Arduino IDE on a LinuxCNC machine
tommylight,

Thanks much appreciated.

Seems to be working with no drama and compiles and downloads what seems like 10x faster than on my Win based machine.

I think I have Windows based PTSD;-)

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum