Suggestion for a PCI EPP card for 7i43

More
1 year 11 months ago #314539 by juliankoenig87
Replied by juliankoenig87 on topic Suggestion for a PCI EPP card for 7i43
Mhmmm.
loadrt hm2_7i43 ioaddr=0xd000 ioaddr_hi=0xd010 epp_wide=0 config="firmware=hm2/7i43-4/SVST4_4.BIT num_encoders=0 num_pwmgens=0 num_stepgens=3"
gives me:
Warning: Spoiler!

Please Log in to join the conversation.

More
1 year 11 months ago #314540 by PCW
Replied by PCW on topic Suggestion for a PCI EPP card for 7i43
You might try reversing the addresses based on the lspci order:

Region 0: I/O ports at d010
Region 1: I/O ports at d000

It may also be that the 7I43 is damaged

Please Log in to join the conversation.

More
1 year 11 months ago #314542 by juliankoenig87
Replied by juliankoenig87 on topic Suggestion for a PCI EPP card for 7i43
Yes. Tried it before. Might be a faulty 7i43. Or I shoul test with an old pc with an "real" parport.

Please Log in to join the conversation.

More
1 year 11 months ago #314544 by PCW
Replied by PCW on topic Suggestion for a PCI EPP card for 7i43
Supposedly the Sunix based cards are OK for EPP mode

(the NetMOS 9805 based PCI cards do not implement EPP properly so can never work)

Please Log in to join the conversation.

Time to create page: 0.037 seconds
Powered by Kunena Forum