Simple one.... how to eleminate "Do you really want to close LinuxCNC?"

More
1 year 11 months ago #315488 by slowpoke
Simple one.... how to eleminate "Do you really want to close LinuxCNC?" was created by slowpoke
Thanks , but nanny not required, how do I get axis to just close and not ask?

...and while I'm at it what about eliminating the 30 second delay for computer shut-down, can it just do it when I ask?

Thanks....

Please Log in to join the conversation.

More
1 year 11 months ago #315512 by cakeslob
Replied by cakeslob on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"
In axis?
linuxcnc.org/docs/stable/html/gui/axis.h...ble_the_close_dialog

Please Log in to join the conversation.

More
1 year 11 months ago #315550 by slowpoke
Replied by slowpoke on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"

In axis?
linuxcnc.org/docs/stable/html/gui/axis.h...ble_the_close_dialog
 
 I'm not a software guy....
To use this, do I simply add the root_window..... to a particular file, or do I need to tweak the source code and then compile?
I'm up for the former, no clue if I need to re-compile.14.2. Disable the Close Dialog# disable the do you want to close dialog
root_window.tk.call("wm","protocol",".","WM_DELETE_WINDOW","destroy .")

Please Log in to join the conversation.

More
1 year 11 months ago #315552 by cakeslob
Replied by cakeslob on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"
put that stuff into a python file and add it to your ini, or in the axisrc file for it to work globally. no need to compile

linuxcnc.org/docs/stable/html/gui/axis.html#sub:axis-axisrc

Please Log in to join the conversation.

More
1 year 11 months ago #315569 by rodw
Replied by rodw on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"
to save 30 seconds out of your life try

sudo shutdown now

You might need to give permissions to skip the sudo password
askubuntu.com/questions/147241/execute-sudo-without-password

Please Log in to join the conversation.

More
1 year 11 months ago #315592 by slowpoke
Replied by slowpoke on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"

put that stuff into a python file and add it to your ini, or in the axisrc file for it to work globally. no need to compile

linuxcnc.org/docs/stable/html/gui/axis.html#sub:axis-axisrc
 
Code:
~/.axisrc   ???

where is .axisrc?  or do I need to create it?  and does it need a file name before the extension?
What does  "
Code:
~/"
mean?
I'm guessing here.... there might be a file ending with
Code:
".axisrc"  possibly in the folder associated with the particular GUI I'm using, but I don't see one, so perhaps I need to create one? I'm a little lost here guys?

Please Log in to join the conversation.

More
1 year 11 months ago #315594 by rodw
Replied by rodw on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"
A file starting with a period denotes a hidden file.
You can tell thunar browser to show them.
The tilde ~ is shorthand for your home folder,

Please Log in to join the conversation.

More
1 year 11 months ago #315619 by slowpoke
Replied by slowpoke on topic Simple one.... how to eleminate "Do you really want to close LinuxCNC?"
Thanks guys!

I learned something and it works.
[img

Please Log in to join the conversation.

Time to create page: 0.201 seconds
Powered by Kunena Forum