LINUXCNC_HOME is not set. I thought that I saw in the "linuxcnc" script where it was set upon execution when starting?
This may be why I had so many problems in the past. I prefer to run RIP but, I may have accidentally/inadvertently installed the uspace version
and perhaps not knowing the difference. I recently removed the uspace version however not totally sure that is what caused DESIGNER to
fail.
Additionally, what's a mystery to me is the use of paths in the INI file. Should be using FULL paths or ABSOLUTE paths or other?.......
Here's what is set:
andy@file0x:~$ env
SHELL=/bin/bash
EMC2VERSION=2.10.0~pre0
GLADE_CATALOG_SEARCH_PATH=/home/andy/linuxcnc-dev/lib/python/gladevcp
GLADE_ICON_THEME_PATH=/home/andy/linuxcnc-dev/share/glade/pixmaps:
PWD=/home/andy
LOGNAME=andy
XDG_SESSION_TYPE=tty
MANPATH=/home/andy/linuxcnc-dev/docs/man:/usr/local/man:/usr/local/share/man:/usr/share/man
TCLLIBPATH=/home/andy/linuxcnc-dev/tcl
HOME=/home/andy
LANG=en_US.UTF-8
LINUXCNCVERSION=2.10.0~pre0
XDG_SESSION_CLASS=user
LINUXCNC_EMCSH=/usr/bin/wish8.6
PYTHONPATH=/home/andy/linuxcnc-dev/lib/python
TERM=xterm
USER=andy
SHLVL=1
XDG_SESSION_ID=9
LD_LIBRARY_PATH=/home/andy/linuxcnc-dev/lib
XDG_RUNTIME_DIR=/run/user/1000
LINUXCNC_NCFILES_DIR=/home/andy/linuxcnc-dev/nc_files
EMC2_HOME=/home/andy/linuxcnc-dev
PATH=/home/andy/.local/bin:/home/andy/bin:/home/andy/linuxcnc-dev/bin:/home/andy/linuxcnc-dev/scripts:/home/andy/linuxcnc-dev/tcl:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/andy/.local/bin:/home/andy/.local/bin
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
SSH_TTY=/dev/pts/2
_=/usr/bin/env
