Indivudual home buttons - EMC2-Axis

On my mill there are individual buttons to home, X, Y, Z

On my lathe (EMC2) there is only a home all button.

I would like to be able to home the two axis X & Z independently.

Joint 0 is the X axis, and Joint 1 is the Z axis

How do I go about getting individual home buttons to display and work in EMC2?

For the moment I'm not planning on using actual home switches, just homing from the GUI.

Thanks,
Jeff

 

EMC2 is a historic name for Linuxcnc so not very helpful
What GUI?
What version?

rodw wrote:

EMC2 is a historic name for Linuxcnc so not very helpful
What GUI?
What version?
 

2.93 Axis (for now will explore other GUI's when I have everything sorted out)

slowpoke wrote:

2.93 Axis (for now will explore other GUI's when I have everything sorted out)

This is a great strategy!
I think in the machine menu, there is a homing menu for each axis but I don't have a sim handy to check.

I think in axis, I think it has to do with the ini entry HOME_SEQUENCE. I think if you remove that entry, it will remove home all button

cakeslob wrote:

I think in axis, I think it has to do with the ini entry HOME_SEQUENCE. I think if you remove that entry, it will remove home all button
 

You are correct, that works.

Thank you!