Linuxcnc with Remora on BTT SKR PRO V1.2 Help

JR5X
Topic Author
Offline
New Member

1 year 8 months ago #320954 by JR5X

Linuxcnc with Remora on BTT SKR PRO V1.2 Help was created by JR5X

I am new to LinuxCNC. I just performed a fresh installation using (rpi-4-debian-bookworm-6.12.11-arm64-ext4-2025-01-27-0404.img) with the Remora component. Can someone guide me step by step on how to set it up with a BTT SKR PRO V1.2?

Thanks,

Please Log in to join the conversation.

cakeslob
Offline
Platinum Member

1 year 8 months ago #320976 by cakeslob

Replied by cakeslob on topic Linuxcnc with Remora on BTT SKR PRO V1.2 Help

remora-docs.readthedocs.io/en/latest/development/checklist.html

remora-docs.readthedocs.io/en/latest/

forum.linuxcnc.org/18-computer/42276-rem...rocontroller-via-spi

Please Log in to join the conversation.

Time to create page: 0.075 seconds