Need help with CNC machine build up

BX-CNC wrote:

Yes it is my driver
 

Is which of these ways is your stuff connected?

 

ContinenteCNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
Go to "Applications" (upper left corner), then "Terminal Emulator"

Copy the first line, paste in terminal, press enter. Then copy the result or take a picture.

Do it for the remaning commands. One by one.
When i paste the second command it asks me for my password but i dont know why i cant type anything.
 

BX-CNC wrote:

ContinenteCNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
Go to "Applications" (upper left corner), then "Terminal Emulator"

Copy the first line, paste in terminal, press enter. Then copy the result or take a picture.

Do it for the remaning commands. One by one.
When i paste the second command it asks me for my password but i dont know why i cant type anything.
 

 

Just type it and press enter. It just looks like nothing is happening.

ContinenteCNC wrote:

BX-CNC wrote:

Yes it is my driver
Is whitch of these ways is your stuff connected?

 

Attachment not found

 

The first one, active low, theres jumper in pul+ DIR + and ENA+

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
 

user@linuxcnc:~$ sudo cat /proc/ioports | grep parport
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
user@linuxcnc:~$ ls /dev/parport*
ls: cannot access '/dev/parport*': No such file or directory

This is what i get after enter the password, nothing happen

BX-CNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
 
user@linuxcnc:~$ sudo cat /proc/ioports | grep parport
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
user@linuxcnc:~$ ls /dev/parport*
ls: cannot access '/dev/parport*': No such file or directory

This is what i get after enter the password, nothing happen

 

 

It seems you don't have a parallel port at all.

Are you using an old computer with onboard parallel port or a new computer with PCI card?

ContinenteCNC wrote:

BX-CNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
 
user@linuxcnc:~$ sudo cat /proc/ioports | grep parport
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
user@linuxcnc:~$ ls /dev/parport*
ls: cannot access '/dev/parport*': No such file or directory

This is what i get after enter the password, nothing happen

 

It seems you don't have a parallel port at all.

Are you using an old computer with onboard parallel port or did you have to add a PCI card?
 

I have a old PC donated by school and I have a parallel port connected to PC with a USB adapter. Since this PC doesnt have a parallel port connection.

ContinenteCNC wrote:

BX-CNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
 
user@linuxcnc:~$ sudo cat /proc/ioports | grep parport
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
user@linuxcnc:~$ ls /dev/parport*
ls: cannot access '/dev/parport*': No such file or directory

This is what i get after enter the password, nothing happen

 

 

It seems you don't have a parallel port at all.

Are you using an old computer with onboard parallel port or a new computer with PCI card?
 

and I did try using the parallel port tester but i got this
user@linuxcnc:~$ halrun -I -f ptest.hal
Could not open command file 'ptest.hal'
halcmd:

 

BX-CNC wrote:

ContinenteCNC wrote:

BX-CNC wrote:

BX-CNC wrote:

lspci -v
sudo cat /proc/ioports | grep parport
ls /dev/parport*
these commands
 
user@linuxcnc:~$ sudo cat /proc/ioports | grep parport
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
user@linuxcnc:~$ ls /dev/parport*
ls: cannot access '/dev/parport*': No such file or directory

This is what i get after enter the password, nothing happen

 

It seems you don't have a parallel port at all.

Are you using an old computer with onboard parallel port or did you have to add a PCI card?
 


I have a old PC donated by school and I have a parallel port connected to PC with a USB adapter. Since this PC doesnt have a parallel port connection.

This is the connection. Parallel port from bob, port to usb adapter, adapter to pc 

These USB adapters won't work.

You have to buy PCI card adapter with Sunix, Netmos or Moschip chipset. Avoid any WCH chipsets.