Limit Switches on 7i95T

Z3rni3
Topic Author
Offline
Junior Member

1 year 7 months ago #325040 by Z3rni3

Limit Switches on 7i95T was created by Z3rni3

Hey (Time for my daily question),
I've switched my 7i96S with a 7i95T. (working with Pi 5 8GB / LinuxCNC 2.9.4)
After working with the Mesact i don't really understand how to implement the limit switches in my hal file.
Hardware sides everything is fine. The Switches are lighting up like they were when using the 7i96S.

It give me following Error:

Code:

Debug file information: Note: Using POSIX realtime ./main.hal:53: Pin 'hm2_7i95.inm.00.input-00' does not exist 25292

Please Log in to join the conversation.

rodw
Offline
Platinum Member

1 year 7 months ago #325043 by rodw

Replied by rodw on topic Limit Switches on 7i95T

Comment out the error on line 53 (probably need to do this a few times) until it starts, then open halshow and work out the correct spelling

Please Log in to join the conversation.

Z3rni3
Topic Author
Offline
Junior Member

1 year 7 months ago #325044 by Z3rni3

Replied by Z3rni3 on topic Limit Switches on 7i95T

Yeah, this was it...
"inmux.00.input-00" is the correct pin...
I'll make sure to be talking to the correct pin next time, before i ask another stupid question

Please Log in to join the conversation.

Time to create page: 0.073 seconds