Autostart Axis

1 year 7 months ago #325390 by slowpoke

Autostart Axis was created by slowpoke

Google search led to the method shown below, however it does not work for me.
I'm using auto login if that matters.

Suggestions?

Please Log in to join the conversation.

1 year 7 months ago #325394 by Aciera

Replied by Aciera on topic Autostart Axis

'Command' needs an actual application (ie linuxcnc) not just a path to an ini file:

try:

Code:

/usr/bin/linuxcnc '/home/jeff/Desktop/Jeffs-A1S-ClosedLoop/A1S-ClosedLoop.ini'

Also you might want to change the 'Trigger' to 'on login'

Please Log in to join the conversation.

1 year 6 months ago #325451 by slowpoke

Replied by slowpoke on topic Autostart Axis

Aciera,

Thank you works like a charm.

Please Log in to join the conversation.

Time to create page: 0.075 seconds