MPG error

MiRu
Topic Author
Offline
New Member

1 year 6 months ago #326179 by MiRu

MPG error was created by MiRu

Sometimes two axes with MPG are switched on. Where should I look for the error?

Please Log in to join the conversation.

PCW
Offline
Platinum Member

1 year 6 months ago #326180 by PCW

Replied by PCW on topic MPG error

You would probably need to post your hal/ini files for anyone to determine the cause.

Please Log in to join the conversation.

MiRu
Topic Author
Offline
New Member

1 year 6 months ago #326375 by MiRu

Replied by MiRu on topic MPG error

Attachment not found

My files

Please Log in to join the conversation.

PCW
Offline
Platinum Member

1 year 6 months ago #326400 by PCW

Replied by PCW on topic MPG error

Since these pins determine which axis jog, I would monitor them with Halshow
to see if maybe there is a electrical/switch issue with these signals.

parport.1.pin-04-in-not
parport.1.pin-05-in-not
parport.1.pin-06-in-not
parport.1.pin-07-in-not

Please Log in to join the conversation.

Time to create page: 0.133 seconds