[SOLVED]linuxcnc Latency test ambiguous results

More
1 year 6 months ago #327214 by DarkPhoinix
[SOLVED]linuxcnc Latency test ambiguous results was created by DarkPhoinix
 

Attachment not found


 

Attachment not found


 

Attachment not found


 

Attachment not found

 
I have run various tests with different commands to check the latency but I don't know if I'm doing things correctly:
Code:
stress --cpu 4 --io 4 --vm 4 --vm-bytes 1024M --timeout 120s [code]chrt 99 ping -i .001 10.10.10.10 -c 40000000 with stress I get good results with all the cpus at maximum usage, instead with chrt even if the cpus are not busy I see disastrous latency. what should I do (kernel parameters, kernel recompilation)? the PC is not good for LinuxCNC? If I don't use hardware parallel port and use NVEM, does this latency matter for operation? my hardware: motherboard: P8H61/USB3 R2.0 CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz VGA: VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) (Driver NOUVEAU) Controller: NVEM V5
[/code]

Please Log in to join the conversation.

More
1 year 6 months ago #327221 by PCW
Replied by PCW on topic linuxcnc Latency test ambiguous results
What was the result of the ping command?
 

Please Log in to join the conversation.

More
1 year 6 months ago #327224 by DarkPhoinix
Replied by DarkPhoinix on topic linuxcnc Latency test ambiguous results

What was the result of the ping command?

 
You need result of all 40000000?

Please Log in to join the conversation.

More
1 year 6 months ago #327226 by PCW
Replied by PCW on topic linuxcnc Latency test ambiguous results
No, just the statistics reported at the end of:

ping -c 4 -i .2 10.10.10.10
sudo chrt 99 ping -i .001 -q -c  60000 10.10.10.10

The last command will run for 1 minute


 

Please Log in to join the conversation.

More
1 year 6 months ago #327228 by DarkPhoinix
Replied by DarkPhoinix on topic linuxcnc Latency test ambiguous results
ping -c 4 -i .2 10.10.10.10
PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
64 bytes from 10.10.10.10: icmp_seq=1 ttl=255 time=0.295 ms
64 bytes from 10.10.10.10: icmp_seq=2 ttl=255 time=0.416 ms
64 bytes from 10.10.10.10: icmp_seq=3 ttl=255 time=0.278 ms
64 bytes from 10.10.10.10: icmp_seq=4 ttl=255 time=0.425 ms

--- 10.10.10.10 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 612ms
rtt min/avg/max/mdev = 0.278/0.353/0.425/0.067 ms


chrt 99 ping -i .001 -q -c 60000 10.10.10.10
PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.

--- 10.10.10.10 ping statistics ---
60000 packets transmitted, 59999 received, 0.00166667% packet loss, time 60751ms
rtt min/avg/max/mdev = 0.158/0.255/4.918/0.225 ms

Please Log in to join the conversation.

More
1 year 6 months ago #327230 by PCW
Replied by PCW on topic linuxcnc Latency test ambiguous results
rtt min/avg/max/mdev = 0.158/0.255/4.918/0.225 ms

Yeah, ~ 5 ms will be an issue

What is the Ethernet hardware?

If Realtek you likely need to install the DKMS driver

Please Log in to join the conversation.

More
1 year 6 months ago #327232 by DarkPhoinix
Replied by DarkPhoinix on topic linuxcnc Latency test ambiguous results
Code:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
I need search and compile him or only apt-get?

Please Log in to join the conversation.

More
1 year 6 months ago #327233 by PCW
Replied by PCW on topic linuxcnc Latency test ambiguous results
There are some instructions here:

forum.linuxcnc.org/9-installing-linuxcnc...dware-eg-realtek-nic
 

Please Log in to join the conversation.

More
1 year 6 months ago #327242 by DarkPhoinix
Replied by DarkPhoinix on topic linuxcnc Latency test ambiguous results
I have a nvidia 610 video card, should I replace nouveau with the proprietary nvidia driver? (I already did it in theory)

Please Log in to join the conversation.

More
1 year 6 months ago #327244 by PCW
Replied by PCW on topic linuxcnc Latency test ambiguous results
I don't think the video is an issue as it would show up in the generic latency tests.
 

Please Log in to join the conversation.

Time to create page: 0.123 seconds
Powered by Kunena Forum