Can I home X and Y axes simultaneously?

More
1 year 6 months ago #327355 by Aciera
Can I home X and Y axes simultaneously? was created by Aciera
please post your ini file.

Please Log in to join the conversation.

More
1 year 6 months ago #327356 by tommylight
Replied by tommylight on topic Can I home X and Y axes simultaneously?
Yes, set the same home sequence for both in the ini file.

Please Log in to join the conversation.

More
1 year 6 months ago #327363 by tommylight
Replied by tommylight on topic Can I home X and Y axes simultaneously?
From the "machine" menu, choose "homing" then the axis you want to home.

Please Log in to join the conversation.

More
1 year 6 months ago #327387 by tommylight
Replied by tommylight on topic Can I home X and Y axes simultaneously?
What problem?
None of the above are problems, you can set homing pretty much as you like or need or see fit.

Please Log in to join the conversation.

More
1 year 5 months ago #327408 by pippin88
Replied by pippin88 on topic Can I home X and Y axes simultaneously?
Post your ini file

Please Log in to join the conversation.

More
1 year 5 months ago #327566 by rodw
Replied by rodw on topic Can I home X and Y axes simultaneously?
In the ini file the HOME_SEQUENCE determines the home order on a home all. If two axes have the same sequence, they will home together. The exception is joint axes on a gantry which must home seperately.

Please Log in to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum