Need help with Linux 2.5 on a CNC lathe

It looks like the G code is trying to reference / point to another file?

How was the g code generated?

@Pippin88,
Why the report?

The machine has been incredible for 10 years. I think something got messed up with the files. I sent them to the guy that programmed the machine to see if he could figure it out. Thank you.

Groovecooper1 wrote:

Hello got everything up and running the machine will home. I keep getting the same error and I’m not able to run a program. I am not skilled at writing G code, but hopefully this is a quick fix. Any assistance is greatly appreciated 

In line 39 of the referenced G-code file it looks ike there is a command to call a subroutine. That hasn't been found in the current file, so it is looking for it ina separate file of the same name. 

At a guess (and this is a complete guess) you may be running the cooper_groove_master_2B.ngc  file from a backup location ("Old to Hold") and the referenced subroutine file may not exist in that location. 

Have a look around line 39 (might not be _exactly_ line 39 for a reference to <135> and see what it is looking for, and if that exists elsewhere. 
 

will try that, thank you!